background image

12

Performa

 Winch 

20 STP

Installation and Maintenance Manual - Mod.E

Harken

®

 limited worldwide warranty 

Refer to the Harken

®

 Limited Worldwide Warranty in the Harken

®

 Catalogue and on the website 

www.harken.com

Ordering spare parts

Spare parts can be requested from Harken

®

 as 

described in the Harken

®

 Limited Worldwide 

Warranty, indicating the part number in the 
Parts List and including the serial number of 
the winch for which the parts are required.

The serial number of the winch is printed on 

a plate on the drum support of the winch.

 

Harken

®

 limited worldwide warranty - Ordering spare parts

Headquarters

Harken

®

, Inc.

1251 East Wisconsin Avenue
Pewaukee, Wisconsin 53072-3755 USA
Tel: 

(262) 691.3320

Fax: 

(262) 691.3008

Email: 

[email protected]

Web: 

www.harken.com

Manufacturer

Harken

®

 Italy S.p.A.

Via Marco Biagi, 14
22070 Limido Comasco (CO) Italy
Tel: 

(+39) 031.3523511

Fax: 

(+39) 031.3520031

Email: 

[email protected]

Web: 

www.harken.com

Tech Service

Email: 

[email protected]

Customer Service

Tel:

 

(+39) 031.3523511

Email: 

[email protected]

Tech Service

Email: 

[email protected]

Customer Service

Tel: 

(262) 691-3320

Email: 

[email protected]

W XXXXX
XXXXXXXXX

Содержание Performa Winch 20 STP
















Отзывы: