10
L
Installation and Maintenance Manual - Mod.E
Powered Performa
™
Winch
40.2 ST EL
C.
Bolt the base of the winch to the deck using five M6 Socket Head (SH) bolts (not supplied by
Harken
®
), correctly chosen for the thickness and type of the boat deck. Consult the yard that built the
boat in case of doubt.
WARNING!
To install the winch on the deck, use only bolts in A4 stainless steel (DIN 267 part11).
Bolts made of other materials may not have sufficient strength or may corrode which can
result in winch pulling off deck suddenly and unexpectedly during high loads causing
severe injury or death.
NOTICE
To mount winches on the deck, do not use countersunk bolts.
D.
Fill the mounting holes with a suitable marine sealant.
E.
Remove the excess adhesive/sealant from the holes and base drainage channels
F.
Reassemble the winch following the steps of the
Procedure
in the reverse order, and apply the
products indicated in the section on maintenance
.