5
Performa
™
Winch
20.2 PTP
Installation and Maintenance Manual
The winch can be installed following one of the two procedures below
(Procedure1 or Procedure 2):
Procedure 1
To install the winch you must remove the drum and use Socket Head (SH) bolts.
Tools needed
One medium flat-bladed screwdriver
To identify the various parts, refer to the exploded view at the end of this Manual.
Torque to apply when assembling
Install the winch on the deck in the position you have chosen, keeping in mind the limits described
on page 4 and using socket head (SH) bolts. (See paragraph on installation)
1. Unscrew the central screw ( 2Nm/18 in-lb)
2. Lift off the drum n°13 with the socket n°17
and the washer n°20.
Important: pay attenion to the pawls n°4
inside the plain top.
