14
ENGLISH
28-05-19
Winch LokHead 500 KIT.US (INLH500KIT.US)
WARNING!
Mount winch so that drive gear is positioned where rope enters winch
drum. Incorrect positioning of drive gear can weaken winch leading to
failure, possibly resulting in severe injury or death.
WARNING!
Incorrect installation of winch may cause severe injury or death. Consult equipment supplier if in
doubt about correct position of winch.
WARNING!
Verify entry angle of rope. It must be 8° with tolerance of ±2°, to avoid
rope overrides and damaging winch or making winch inoperable,
leading to loss of control, possibly resulting in severe injury or death.
drive gear
ROPE
8°
LOKHEAD WINCH INSTALLATION
Mounting Surface
Winch must be installed on a flat surface, reinforced if necessary, to withstand a load equal of 22 kN�
Winch Entry Angle of Lifting Rope
Winch entry angle must be 8° with a tolerance of ±2° to avoid rope overrides�
Mount winch so drive gear is positioned where rope enters winch drum�
Note: on winch skirt identifies location of drive gear�
Winch Location
Winch must be installed in a position to allow sufficient working space around unit, so not to
impede operation of handles�
Winch must be installed in a position to ensure visibility of the lift trajectory by operator at all times�
Harken
®
accepts no responsibility for defective installation or reassembly of its winches� If you have questions or concerns,
Harken
®
Tech Service is at your disposal at techservice@harken�it�
Mounting Template - Plate Adapter
Ø13
49
102
49
78
11
11
Drilling template of the holes provided for fastening with M12 screws� All dimensions are in mm�