B1140 Winch
41
Inspect gearings, bearings, shafts and pawls for traces of wear or corrosion.
Carefully inspect the teeth of the ring gears to censure there is no trace of damage or wear.
Check the roller bearings and make sure there are no breakages in the ball races.
Replace any worn or damaged parts.
For parts maintenance, use the products listed below. For further details on which products to use where, refer to the
exploded view in fig. 38-39.
Maintenance
Disassembling procedure
29
Maintenance
Maintenance products
Once the winch is completely disassembled, clean
the parts in an ultrasound bath. If this is not
available, immerse the parts in a basin of naphtha.
If this is not possible, clean the parts with a rag.
Once cleaning is finished, dry the parts with a
cloth that leaves no residue.
STRONG THREADLOCKER – GREEN (i.e. LOCTITE 270).
Clean the parts and apply the adhesive, spreading it all over the joint. Assemble the parts and
wait at least 45 minutes before use. To remove screws sealed with threadlocker, you may
need to heat the parts to reduce the effect.
Caution: do not apply this product to screws driven into carbon components.
MEDIUM THREADLOCKER – BLUE (i.e. LOCTITE 243).
Clean the parts and apply the adhesive, spreading it all over the joint. Assemble the parts and
wait at least 45 minutes before use. Generally for use on all screws, requires no heating
before removal.
Fig. 34
Fig. 35
Содержание B 1140 LH RACING
