Maintenance and Inspection
M1025 09-18
Periodically inspect organizers and fasteners for wear, corrosion, and loosening. Tighten
or replace as necessary. The organizer does not come apart. Replace the organizer if one
of the sheaves is worn or does not function.
Frequently flush with fresh water. Periodically clean areas shown below with mild
detergent and water solution. Flush with fresh water. Avoid exposure to teak cleaner and
other caustic solutions.
Inspect fasteners for signs of loosening.
Inspect deck for signs of weakening.
Cleaning and flushing points.
Warranty
For additional safety, maintenance, and warranty information see www.harken.com/manuals or the
Harken catalog.
4
Installation
Install organizer using sealant in holes.
Drill holes to install organizer:
Tip:
Put slight bevel at top of hole to allow sealant to mass around upper part of hole.
Organizer
Screw size
Drill size for clearance hole
40 mm
6 mm
6.25 mm
1/4"
17/64"
50 mm
8 mm
8.25 mm
5/16"
21/64"