6
Radial Winch
60.2 ST
Installation and Maintenance Manual - Mod.E
Follow steps below only to install the winch using hexagonal headed bolts
8. Slide out the central shaft n°19
9. Unscrew the 6 hex screws n°17
( 20Nm/177 in-lb)
10. Remove the drum support n°16
Important: washer n°7 may remain inside the
drum support!
6. Completely unscrew the three screws n° 28
7. Remove the stripper arm housing n°21
Install the winch on the deck in the
position you have chosen, keeping in
mind the limits described on page 4
and using hexagonal headed (HH )M8
bolts.