Harken 46.2 PTBBB, Руководство по установке и обслуживанию

Страница: 3 / 17

3 Radial Winch
46.2 PT BBB / CCC
Installation and Maintenance Manual - Mod.A
Introduction - Technical characteristics - Outline
Introduction
This manual gives technical information on winch installation and maintenance, including
disassembling and reassembling.
This information is DESTINED EXCLUSIVELY for specialised personnel or expert users.
Installation, disassembling and reassembling of the winch by personnel who are not experts may
cause serious damage to users and those in the vicinity of the winch.
Harken ® accepts no responsibility for defective installation or reassembly of its winches.
In case of doubt the Harken ® Tech Service is at your disposal at techservice@harken.it
This Manual is available only in English. If you do not fully understand the English language, do
not carry out the operations described in this Manual.
Technical characteristics
Power ratio Gear ratio
1st speed 11,70 : 1 2,30 : 1
2nd speed 46,50 : 1 9,17 : 1
The theoretical power ratio does not take friction into account.
Weights
PT BBB/CCC versions
Weight (Kg) 9,70
Versions:
BBB = all bronze
CCC = All-Chrome bronze
Maximum working load
WARNING!
The maximum working load (MWL) for the 46.2 PT Radial Winch is 1300 Kg (2866 lb)
Subjecting the winch to loads above the maximum working load can cause the winch to fail or
pull off the deck suddenly and unexpectedly during high loads causing severe injury or death.
Outline
Li
ne
e
nt
ry
h
ei
g
ht
181 mm
Ø101 mm
90 mm
Ø184 mm