19
Radial Winch
40.2 ST EL
Installation and Maintenance Manual - Mod.E
Assembly
Make sure that the holes and drainage channels in the base of the winch are not obstructed.
Assemble the winch in the reverse order of the sequence in the section of disassembly.
To tighten bolts, use the torque indicated in the disassembly procedure.
In case of doubt concerning the assembly procedure contact Harken® Tech Service:
[email protected]
If the jaws have been disassembled,
insert peeler between the two jaws, taking
care that the letters TOP on the peeler
are facing upwards.
When positioning the stripper arm, align
the peeler with it.
OIL
To assemble the pawls
Correctly position the spring in its housing
as shown at left. Hold the spring closed
and slide the pawl into its housing. Once
in position, check that the pawls can be
easily opened and closed with a finger.
NOTICE
Before screw the central screw, check
the correct position of the o-ring in the
assy socket and apply Harken
®
grease.
