background image

3

Radial Winch 

35.2 PT

Installation and Maintenance Manual

Introduction - Technical characteristics - Outline

Introduction

This manual gives technical information on winch installation and maintenance, including

disassembling and reassembling.

This information is DESTINED EXCLUSIVELY for specialised personnel or expert users.  

Installation, disassembling and reassembling of the winch by personnel who are not experts may 

cause serious damage to users and those in the vicinity of the winch.

Harken

®

 accepts no responsibility for defective installation or reassembly of its winches.

In case of doubt the Harken

®

 Tech Service is at your disposal at [email protected]

This Manual is available only in English. If you do not fully understand the English language, do 

not carry out the operations described in this Manual.

Technical characteristics

Power ratio 

Gear ratio

1st speed

13,50 : 1

2,13 : 1

2nd speed

35,90 : 1

5,65 : 1

 

The theoretical power ratio does not take friction into account.

Weights

ST A version

Weight (Kg)

3,1

Versions:

A = drum in anodised aluminium 

Maximum working load

WARNING!

The maximum working load (MWL) for the 35.2 PT Radial Winch is 650 Kg (1433 lb)

Subjecting the winch to loads above the maximum working load can cause the winch to fail or 

pull off the deck suddenly and unexpectedly during high loads causing severe injury or death.

Outline

Li

ne

 e

nt

ry

 h

ei

gh

t

Ø149 mm

148 mm

Ø80,5

80 mm

Содержание 35.2 PT


















Отзывы: