Harken Industrial IN1650 Скачать руководство пользователя страница 5

20/03/19 ENGLISH 

5

SAFETY INFO

  Harken R27 rail must be installed by personnel authorized by Harken or Harken dealer or by qualified 

personnel trained on the installation of the Harken R27 rail, and on PPE (Personal Protective Equipment)

  The rail installer must make sure that the structure where the rail will be installed is suitable to fasten  

the device and to support the loads for which the rail has been certified.

  The type of structure anchor/fixing must be defined by a qualified professional.

  The procedure to fasten the rail to the base must be documented in suitable reports, made available  

for future consultation.

  Each rail has maximum load limits, which mostly depend on the structure where it is installed  

and on the distance between the anchor/fixing; those limits must not be exceeded.

  The R27 rail must be used solely with Harken trolleys (IN9565, IN9565.CLEAR, IN9608, IN9608.CLEAR, 

IN9606, IN9606.CLEAR, IN10614, IN10614.CLEAR, IN10615, IN10615.CLEAR, IN10567, IN10567.CLEAR), 

wearing suitable PPE (Personal Protective Equipment) compliant with the laws in force  

on workplace safety.

  Before using the rail, check its path and the falling hazards, evaluating the minimum fall clearance  

and choosing the PPE with shock absorber deployment most suitable to the type of hazard.

  Before each use, check the system for any trace of wear, corrosion, deformation, loose connection, etc...  

In case of doubts, if a rail seems unsafe, it must be checked by Harken or Harken dealer’s authorized 

personnel or by qualified personnel.

  All operators using the rail must observe the instructions for uses, and especially the number of operators  

it can support at the same time.

  In case of extreme weather events, do not use the rail

  In case of fire or if the rail has been struck by lightning, stop using it, report the issue to Harken Approved 

Installer and/or Harken to arrange a detailed inspection by Approved and Qualified Personnel.

  Do not modify the rail in any way, unless previously authorized in writing by Harken or Harken dealer’s 

authorized personnel or by qualified personnel.

  Harken shall not be liable for injuries or damages resulting from an improper use of the rail.

  The system must be used only by physically and psychologically healthy personell. Cardiac and circulatory 

problems, taking medications, alchool and drugs could compromise the safety of the user when working  

at height.

  Before installing and using the system, it is mandatory to organize the safety plan in case emergencies 

occur during the work.

SAFETY INFO

Содержание IN1650





























Отзывы: