Hark HK0526, Инструкция по сборке и эксплуатации

Страница: 15 / 20

13
times until burner has lit. If the burner has not lit, repeat this process.
4. If the burner has not lit after 3 attempts, turn off the gas tap, wait 5 minutes and then repeat
step 3. If the pizza oven still fails to light, please refer to the manual ignition instructions
below.
5. When the burner is lit, adjust the heat by turning the knob to the High or Low position.
6. After use, turn all control knobs to the OFF setting and turn off the gas control valve at the
cylinder.
Manual Ignition
1. Remove pizza stone from support grid.
2. Open the gas control valve at the cylinder.
3. Insert lit match through the supporting grid and place near the burner.
4. Push and turn the control knob anti-clockwise to the High flame position.
5. If burner still fails to light after 5 seconds, turn to OFF position and wait 2 minutes. Then
begin again from step 3. If the burner still fails to light after several attempts, call the
customer service line.
WARNING: IF THE BURNER FAILS TO IGNITE, TURN THE CONTROL KNOB OFF
(CLOCKWISE) AND ALSO TURN THE CYLINDER VALVE OFF BEFORE
ATTEMPTING TO RELIGHT WITH IGNITION SEQUENCE.