INSTALLING STAINLESS STEEL “S” BURNER
PARTS LIST FOR NATURAL GAS WITH NO VALVE
ITEM DESCRIPTION
1. S-Burner
2. Black pipe cap
3. Sand
4. Flex connector
5. Brass reducing elbow
6. Brass reducing union
7. Volcanic cinders (3/8”)
8. Damper stop
18SNSB0A0
24SNSB0A0
30SNSB0A0
SSSB18
SSB24
SSB30
CAP-8
CAP-8
CAP-8
SD
SD
SD
FCNW-18 FCNW-18 FCNW-18
50-6-8
50-6-8
50-6-8
46-6-8
46-6-8
46-6-8
VC
VC
VC
DS
DS
DS
1.
2.
3.
4.
5.
6.
7.
8.
1. Make sure gas is shut off.
2. Connect black pipe cap (2) to the side of the burner you are not running gas to.
3. Connect either the brass reducing elbow (5) or brass reducing union (6) to the
side of the burner that is not capped.
4. Connect the other brass reducer to your gas supply.
5. Use the flex connector (4) to connect the two reducers.
6. Finally, make sure that all of your connections are tight before lighting.
5
