Hardy Process Solutions HIFS-3030-01-PS-T, Руководство по эксплуатации и установке

Страница: 38 / 54

Table 6: Pit Frame Carbon Steel/Model Numbers and Dimensions
Model Number
Size
Platform Size Material
HIFSPF-3030-PS 30in x 30in 76m x 76cm Painted Carbon Steel
HIFSPF-3636-PS 36in x 36in 91cm x 91cm Painted Carbon Steel
HIFSPF-4848-PS 48in x 48in 122cm x 122cm Painted Carbon Steel
HIFSPF-4860-PS 48in x 60in 122cm x 152cm Painted Carbon Steel
HIFSPF-4872-PS 48in x 72in 122cm x 183cm Painted Caron Steel
HIFSPF-6060-PS 60in x 60in 152cm x 152cm Painted Caron Steel
HIFSPF-6084-PS 60in x 84in 152cm x 213cm Painted Caron Steel
HIFSPF-7284-PS 72in x 84in 183cm x 244cm Painted Caron Steel
Hardy Floor Scales
28
Step 3. Should pit drainage be required, slope the
pit floor to an installed drain while main-
taining a level area at each corner. (See
Fig. 23)
11” (279.4mm)
Drain
4” (101.6mm)
FIG. 23 DRAIN INSTALLATION DIMENSIONS
Step 4. The drain hole will have to be deep
enough to accommodate the pit coping,
plus the thickness of the pit floor. (See Fig.
24)