11
Leveling the Scale
Adjust the level of the scale by using the leveling
bubble and the adjustable feet.
Scale Connections
The scale has a cable exiting the rear. Wire to the
preferred instrument by referring to the instrument
and cell wiring diagram.
Make sure the cable is not pinched and is clear of the
feet. The Bench Scale requires a recommended DC
or AC excitation voltage of 5 volts with a maximum of
15 volts. Wire the Scale cable to an instrument or
indicator following the color code label found on the
cable.
WARNING
USE CAUTION WHEN WIRING. MAKE SURE
TO DISCONNECT ALL POWER TO THE
SCALE. FAILURE TO REMOVE POWER CAN
RESULT IN SCALE OR INSTRUMENT
DAMAGE, DEGRADATION OF
PERFORMANCE ORPERSONAL INJURY
NOTE:
Drawings and wiring diagrams are available at
www.hardysolutions.com
