Connecting the eCB1 and the cPµ1 via BUS
Image 1
: shows the BUS-clamps of the cPµ1.
Image 2
: shows the BUS-clamps of the eCB1.
(Please note the green marks in Image 1 )
Image 1
cPµ1 charging
station
Image 2
ecB1 and Bus terminal
These have to be connected as follows:
plug the
brown wire
(second slot on the eCB1) in
clamp 1
(shown in Image 1).
plug the
black wire
(third slot on the eCB1) in
clamp 2.
Last step you plug the
blue wire
(first slot on the
eCB1) in
clamp 3.
Configuration manual
eCB1
Smartmeter
Version: 1.2.1
7
