Should the interface not open, please verify the following things:
1. The name resolution does not work.
Please open the interface via the actual IP-adress of the eCB1.
„(http://<IP>/)“
Open the desktop of your router and read the IP address of the eCB1 (see manual of your
router).
If you have Windows XP/7/8: Install Apple Bonjour®. You can find the download link on
. Then try to enter the URL again.
Please note:
Apple Bonjour® is also included in Apple iTunes®.
Alternatively, contact the network administrator.
2. The Status LED is not glowing.
If the
Status LED
of the eCB1 does not glow, it means that the
Smartmeter is not provided with any power.
Please make sure that at least one of the phase conductors L1 and
the neutral conductor N are connected to the eCB1.
3. The Status-LED glows or blinks in red.
If the
Status LED
glows or blinks in red, an error has occurred.
Please
restart
the eCB1 by pressing the
Reset-button
with a pointy
object
for about 1-3 seconds
.
4. The Network-LED is not glowing
The network cable is not properly/correctly connected to the network port if the
network-LED
does not glow. Please make sure that you have inserted both ends of the
cable properly and correctly.
5. eCB1 could not be found in the network
This means that eCB1 is not located in the same local network. Please connect the
eCB1 with the same Router/Switch as the one of your PC’s/laptop’s.
If that doesn’t solve your problem, please reset the eCB1 to its factory settings by
pressing the
Reset-button
with a pointy object for about 4 seconds to 10 seconds.
Configuration manual
eCB1
Smartmeter
Version: 1.2.1
6
