CUS-013-0028-09
Page 21 of 22
Replacing the Halogen Light Bulb
1. Turn the rotisserie off by pushing in the red main ON/OFF
switch and disconnect the power cord from the wall
receptacle.
2. Allow the rotisserie to cool down.
3. Remove the halogen light access panel located on the left
side of the rotisserie by loosening the thumb screws (by
hand or using a screwdriver) (Figure 6-2).
Figure 6-2
4. Remove the two wing nuts on the halogen light bulb
support bracket in order to access the halogen light bulb
(Figure 6-3).
Figure 6-3
5. While wearing gloves, gently pull the old halogen light bulb
out of its fixture (Figure 6-4).
Figure 6-4
LOOSEN
(X 2)
