Hardo OptiLine A1 Series, Инструкция по использованию и обслуживанию, Страница: 15 / 16

Strona 15 z 16
12.
TECHNICAL DATA
12.1 Electrical and environmental parameters
The basic electrical parameters of OptiLine **-*******A1- series luminaires are presented in Table 3.
Type
Power^
[W]
Power
factor
Rated voltage
[V]
Ambient
temperature
[°C]
Protective class IP
OptiLine 60-1******A1- 20,8 0,89
AC 230, 50Hz
DC 230, 0Hz
0
≤T
a
≤+45;
I 66/67
OptiLine 60-2******A1- 25,6 0,91
OptiLine 60-3******A1- 30,6 0,93
OptiLine 12-1******A1- 39,6 0,95
AC 230, 50Hz
DC 230, 0Hz
0
≤T
a
≤+45;
OptiLine 12-2******A1- 49,2 0,96
OptiLine 12-3******A1- 58,9 0,97
^ Power values given for AC power supply, power tol/- 5%.
Table 3. The basic electrical parameters of OptiLine **-*******A1-
12.2 Photometric data
Photometric data for OptiLine **-*******A1-
for an ambient temperature of +25 °C, a bar temperature of 4000K and a
colour rendering index CRI>80 are shown in Table 3.
Type
Luminous flux with AC voltage
[lm]^
Luminous flux with DC voltage
[lm]^
Colour
Temperature
[K]
CRI
Transparent Frosted Opal Transparent Frosted Opal
OptiLine 60-1******A1- 3485 3324 2931 800 750 650
3000K
4000K
5000K >70
>80
>90
OptiLine 60-2******A1- 4422 4218 3719 800 750 650
OptiLine 60-3******A1- 5182 4943 4358 800 750 650
OptiLine 12-1******A1- 6739 6504 5700 1250 1200 1050
OptiLine 12-2******A1- 8665 8363 7329 1250 1200 1050
OptiLine 12-3******A1- 10342 9981 8747 1250 1200 1050
^Possible ranges of luminous flux depending on the type of shade, colour temperature and CRI (transparent, opal or frosted), tol/- 5%.
Table 4. Basic photometric data of OptiLine **- *******A1-