Hardlife Utility C2020, Инструкция по эксплуатации

Страница: 8 / 16

7
www.hardlifeutility.com
6. Secure the lower and upper tracks using M10 x 90 mm bolts (component code 29) and the door side
splint (component code 36), as shown in
Figure 2.
Secure the upper tracks (11L and 11R) to the arch us-
ing M10 x 30 mm bolts (component codes 32), as shown in
Figure 2.
7. Install the bottom tensioning tubes at the front panel (component code 14), as shown in
Figure 1
.
NOTE:
• Plug both the ends of the bottom tensioning tubes with plastic plugs, if available.
• There are clips on the base plates to fix the bottom tensioning tubes, as shown in
Figure 3.
8. Install the horizontal tubes at the front panel (component code 13), as shown in
Figure 1.
Secure com-
ponent code 13 to component codes 9 / 9A using M8 x 70 mm carriage bolts (component code 30), as
shown in
Figure 2.
Secure component code 13 to the tracks using M10 x 30 mm bolts (component code
32).
9. Install the winch door beams (component code 12) between the winch door’s upper tracks, and secure
using M10 x 90 mm bolts (component code 29), as shown in
Figure 2.
Figure 2