Last update: 2019/04/02 00:32
odroid_go:go_assembling http://wiki.odroid.com/odroid_go/go_assembling
http://wiki.odroid.com/
Printed on 2020/06/10 17:38
I. 1x 10pin mail header
J. 10x Screws
K. 1x LCD window
L. 1x Plastic D-Pad, Button set
M. 1x Micro USB Cable
N. 1x 1200mAh Li-ion battery
Build instruction
This section shows you how you can build the ODROID-GO. Please carefully follow the instruction
below.
LCD window
First, in order to protect LCD screen, you have to place the enclosed plastic screen cover on the front
enclosure. Please completely remove the sticker on the back of the screen cover and carefully place it
on the front enclosure.
LCD screen
Second, you need to attach the 2.4” LCD screen to the front enclosure. Please note that you must
remove the vinyl cover on the LCD screen before placing LCD module in the front enclosure. Also, you
would need to slightly wipe or blow out the window cover or LCD screen in order to remove any dust
