4
3C Low-Pressure Dead-Length Collet Blocks
Instructions B-143
Hardinge Inc. One Hardinge Drive, Elmira, New York U.S.A. 4902-507 800.843.880 (Canada 800.468.5946) www.hardingetooling.com
Par
t No
. B -0009500-0
43
AIR SUPPLY
4-WAY, 2-POSITION
CONTROL VALVE
#7799-00-00-000071
AIR DRIVEN HYDRAULIC PUMP
1500 PSI #7799-00-00-000070
2500 PSI #7799-00-00-000069
PRESSURE
RETURN
CLAMP
UNCLAMP
HYDRAULIC
COLLET CLOSERS
(double-acting)
AIR SUPPLY
PRESSURE
RETURN
AIR DRIVEN HYDRAULIC PUMP
1500 PSI #7799-00-00-000070
2500 PSI #7799-00-00-000069
HYDRAULIC
COLLET CLOSERS
(double-acting)
ACCUMULATOR
#7799-00-00-000068
HORIZ MOUNT
#7799-00-00-000067
QUICK
DISCONNECT
HANDLE
#7799-00-00-000075
STD. MANIFOLD
WITH CHECK VALVE
#7799-00-00-000074
FIXTURE
PLATE
CLAMP
UNCLAMP
4-WAY, 3-POSITION
CONTROL VALVE
#7799-00-00-000072
Example of a typical hydraulic configuration
Components include a pump, control valve and three hydraulic collet blocks supplied by Hardinge mounted on a customer
machined fixture plate. (schematic shown in clamp position) 5000 psi (344 bar) rated hose/tubing is recommended.
Dimensions for mounting holes are available on the installation instructions online at www.hardingetooling.com
Example of a quick disconnect hydraulic configuration
Components include a pump, control valve, accumulator, quick disconnect handle, manifold with check valve and three
hydraulic collet blocks supplied by Hardinge on a customer machined fixture plate. The control valve should mount outside
of the machine with the pump or on the outside wall of the machine. The quick disconnect with check valve allows you to
remove the hydraulics while in the clamp mode – ideal for preloading pallets. An accumulator is required when using the
quick disconnect product. (Schematic shown in the clamp position) 5000 psi (344 bar) rated hose/tubing is recommended.
Dimensions for mounting holes are available on the installation instructions online at www.hardingetooling.com
