manualshive.com logo in svg

Harding MicroComm DXL IMS-640, Руководство по эксплуатации, Страница: 12 / 44

Поделиться
Скачать
Harding MicroComm DXL IMS-640 Скачать руководство пользователя страница 12

IMS-640 VoIP Intercom Master Station Operating Instructions 

MicroComm DXL 

MN-DXL-IMS-640-Pv1  

Page 

6 

After a fixed interval, if the call request is not acknowledged (or canceled), it will “time out” and a 

call request 

time-out alarm

 will be annunciated at the Secondary Master Station. (The original call request remains queued at 

the Master Station.) 

 Note:

 When the system is set up, the System Administrator will set the time allowed before a time-out 

alarm is triggered by a failure to respond to the call request. 

A Secondary Master Station is simply another Master Station designated to receive time out calls, fault reports as 
a back up function. 

All intercom activities (call requests, calls, cancels, etc.) are logged so that they can be printed and accessed for 
review. 

Intercom Stations 

A typical Intercom Station consists of: 

 

a call switch 

 

a loudspeaker/microphone, which enables two-way 
communication. 

Intercom Stations may also take the form of telephone handsets, talkback 
loudspeakers with call request buttons, etc. Whatever their configuration, 
they include a means to place a call request and a means of two-way 
communication. They may include 

call indicator lights

 to signal that call 

requests have been placed or that calls have been acknowledged. 

 

 

Initiating a Call Request 

A call request is initiated by pressing the call request switch (lifting the telephone handset, etc.) at the Intercom 
Station. 

A call request will not be able to be initiated from an Intercom Station if: 

 

the Station is disabled, or 

 

the Station has initiated a call request that has not yet been acknowledged. 

Disabled Stations 

If you disable an intercom or other station, it can no longer initiate a call request. However, you may call a 
disabled Intercom Station. 

At any time, you may enable a disabled Station, which puts it back into operation. 

When you disable a Station, it is added to the Disabled List. When you enable a disabled Station, it is removed 
from the Disabled List. 

Intercom Calls 

Your Master Station will be connected to the Intercom Station whenever: 

Typical Intercom Station 

Содержание MicroComm DXL IMS-640













































Отзывы:

Нет отзывов