manualshive.com logo in svg

Hardi MASTER HVZ Series, Инструкция

Поделиться
Скачать
Hardi MASTER HVZ Series Скачать руководство пользователя страница 29

29

GB 12 01 MA

Maintenance

10. Replace all the filters and nozzles and store the

sprayer. If, from previous experiences, it is noted
that the solvents in the pesticide are particularly
aggressive, store the sprayer with the tank lid open.

NOTE!

 If the sprayer is cleaned with a high pressure

cleaner lubrication of the entire machine is recom-
mended.

Cleaning and maintenance of

Cleaning and maintenance of

Cleaning and maintenance of

Cleaning and maintenance of

Cleaning and maintenance of  f

 f f

 f filter

ilter

ilter

ilter

iltersssss

Clean filters ensure:

• Sprayer components such as valves, diaphragms and

operating unit are not hindered or damaged during
operation.

• Nozzle blockages do not occur whilst spraying.

• Long life of the pump. A blocked suction filter will

result in pump cavitation.

The main filter protecting sprayer components is the
suction filter at the top of the tank. Check it regularly.

Содержание MASTER HVZ Series

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды