manualshive.com logo in svg

Hardi LZ Series, Инструкция

Поделиться
Скачать
Hardi LZ Series Скачать руководство пользователя страница 16

16

NOTE: If a cleaning procedure is given on the chemical label, follow it
closely.

7. Start the pump and operate all controls enabling the liquid to come
in contact with all the components. Leave the distribution valves until
last. Some detergents and deactivating agents work best if left in the
tank for a short period. Check the label.

The Self-Cleaning Filter can be flushed by removing the bypass hose
from the bottom of the filter. Stop the pump and remove the hose. Start
the pump for a few seconds to flush filter. Be careful not to loose the
restrictor nozzle.

8. Drain the tank and let pump run dry. Rinse inside of tank, again
letting the pump run dry.

9. Stop the pump. If the pesticides used have a tendency to block
nozzles and filters, remove and clean them now. Check also for
sediment on the pressure side of the safety valve for the Self-Cleaning
Filter.

10. Replace all the filters and nozzles and store the sprayer. If, from
previous experiences, it is noted that the solvents in the pesticide are
particularly aggressive, store the sprayer with the tank lid open.

NOTE: If the sprayer is cleaned with a high pressure cleaner we
recommend lubrication of the entire machine.

Filters
Clean filters ensure;
• Sprayer components such as valves, diaphragms and operating unit

are not hindered or damaged during operation.

• Nozzle blockages do not occur whilst spraying.
• Long life of pump. A blocked suction filter will result in pump cavita-

tion.

Содержание LZ Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды