manualshive.com logo in svg

Hardi Boss BS 300, Инструкция

Поделиться
Скачать
Hardi Boss BS 300 Скачать руководство пользователя страница 6

4

We congratulate you for choosing a HARDI plant protection product.
The reliability and efficiency of this product depend on your care. The
first step is to carefully  read and pay attention  to this  instruction
book. It contains essential information for the efficient use and long life
of this quality product.

As the instruction book covers all BOSS (BS) and HERON (HR) mod-
els, please pay attention to the paragraphs dealing with precisely your
model. This book is to be read in conjunction with the
“Spray Technique” book.

Description

The HARDI BS/HR sprayer is for the application of plant protection
chemicals. They consist of pump, operating unit, frame with tank and
spray boom.

The design of the diaphragm pump is simple, with easily accessible
diaphragms and valves that ensures liquid does not contact the vital
parts of the pump.

The tank, made of impact-proof and chemical resistant polyethylene,
has a purposeful design with no sharp corners, for easy cleaning.

The BK operating unit consists of; pressure agitator valve, safety valve,
main ON/OFF valve, pressure filter with pressure gauge, distribution valves
with pressure equalization and HARDI-MATIC pressure control valve.

HARDI-MATIC ensures a constant volume per hectare of the liquid
(l/ha) at varying speed in the same gear when the number of P.T.O. rev-
olutions is between 300-600 r/min (800-1100 r/min for 1202/6.0 pumps).

The manually folded 6, 8  or 10 metre SB spray boom is fitted. It is
fitted with a spring loaded breakaway at the pivots and TRIPLET
SNAP-FIT nozzle bodies with COLOR TIP nozzles.

Identification plates
An identification plate fitted on the frame and pump is to indicate
model, year of production with serial number and country of origin. If
ordering spare parts, inform your dealer of these so the right model
and version are described.

Содержание Boss BS 300





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды