Hard Head 017295, Руководство по эксплуатации

Страница: 23 / 23

EN
23
7. Place the shelves (D) on the shelf
supports.
FIG. 13
8. Fit the post caps (E) on the ends of the
angle posts (A).
FIG. 14
9. Join the parts of the workbench together
by aligning the angle posts (A) to each
other. Align the holes in the post clamp
(G) to the two holes on the back of the
back, middle angle posts. Clamp the post
clamp to lock the angle posts together.
Fit the other post clamp on the two front,
middle angle posts.
FIG. 15
NOTE:
• Remove the post clamps with a
screwdriver, if necessary.
• Check that the shelf supports are
correctly assembled.