Page 3
Rev. 111319
DiscountRamps.com
•
1-888-651-3431
Note:
First, only hand-tighten parts. When assembly is complete, tighten all hardware with tools.
Step 1.
Connect the bottom straight
tubes (E) to the axle (F) using
M6x40 bolts (P), lock washers (Q),
and nuts (R).
Step 2.
Connect the vertical straight
tubes (C) to the assembly using
M6x40 bolts (P), lock washers
(Q), and nuts (R). Make sure the
indentations on the bars are facing
inward.
Step 3.
Slide the gas tank strap
(G) onto the vertical straight tubes.
Then, attach the plastic block (L)
with the M6x70 bolts (N), lock
washers (Q), and nuts (R). If it
is difficult to fit the bolts into the
indents in the plastic block, you may
use a hammer or mallet.
Assembly
(4a)
Step 4.
Clip each foot (I) into place
on the foot tube (H). Connect the
handle straight tubes (D) to the foot
tube using M6x60 bolts (O). Make
sure the indentations on the bars
are facing inward. Do not attach the
washers and nuts yet.
(1b)
(2b)
(4b)
(2a)
(3b)
(4c)
(1a)
(3a)
