2. The only assembly required is attaching the Handles to the drawers and one Handle to the side of the Roller
Cabinet Chest, and assembling the 4 Castors.
Use two Bolts (#5) to attach the Handle (#4) to the side of the chest (Note: Handle may be attached to
either side of chest). Note: The Tool Cabinet includes only 1 Handle. Use the included plugs to cap the
two holes on the side opposite where the Handle is attached.
Use Bolt (#10), and Washer (#11) to attach
Handle (#12) to the front of each drawer.
Attach each Castor (#18) to the chest using
Screw (#19), Washer (#16), Spring Washer (#15).
3. Check each drawer to make sure drawer slide is
smooth. Make sure the compartment Gate (#17)
properly hangs and opens properly. Check the lock
with enclosed keys, and the Lock Bar (#13), to make
sure locking mechanism works properly. The Tool
Chest is ready for use.
4
Handle
13
Lock Bar
5
Bolt
15
Spring Washer
6
Swivel Castor
16
Washer
9
Slide
17
Gate
10
Bolt
18
Rigid Caster
11
Washer
19
Screw
12
Handle
#39420 Page 3
Parts Diagram
Part # Description
Part # Description
Part Number Listing
REV 12/03;
REV 01/04; REV 11/06
16
WASHER
15
SPRING
WASHER
