Page 3
For technical questions, please call 1-888-866-5797.
Item 56514
Installing Batteries
Remote
1. Unscrew and remove the battery
cover on the back of the Remote.
2. Insert two AA batteries (not included)
into battery compartment,
following indicated polarity.
3. Replace the Remote battery cover
and screw it on securely.
Truck
1. Turn Truck over on its top.
2. To remove the battery cover, unscrew
the single screw on the right side and
disengage latch marked ‘Open.’ See below.
Battery
Compartment
Battery
Cover
3. Insert four “AA” batteries (not included)
into the battery compartment,
following the indicated polarity.
CAUTION! Replace all batteries at
one time. All batteries must be of
the same type and charge level.
4. Replace battery cover on bottom side
of the Truck and ensure that latch
marked ‘Open’ is secured in place.
5. Screw cover on securely.
Operation
Operating Truck
CAUTION!
Keep spectators a safe distance away during use.
Note:
Read through this section completely and get familiar with the controls BEFORE using Truck.
1. Place Truck on a flat surface and stand
behind it with the tail pointing towards you.
2. To move Truck forward, push Left control
stick up. To move Truck backward,
push Left control stick down.
3. To steer Truck to the right, push the Left stick
up while pushing the Right stick to the right.
4. To steer Truck to the left, push the Left stick
up while pushing the Right stick to the left.
5. To stop the Truck, release control sticks.
Note:
If the Truck will not stay straight when
moving forward, use the Front Wheel Alignment
Lever to adjust alignment of the front wheels.
Front Wheel
Alignment Lever
6. After use, turn power switch off. Store indoors,
away from water, out of the reach of children.
