Page 3
For technical questions, please call 1-888-866-5797.
Item 64330
4. Connect Switch and light wires
to the Relay. Make sure all
connections are secure.
5. Attach the red wire to positive
12V DC battery terminal.
6. Attach the black wire to negative
12V DC battery terminal.
CAUTION!
Before connecting to
a battery always make sure the
Switch is in ‘Off’ position.
7. Use wire ties to secure wires to
the vehicle and bundle excess
harness wire together.
8. Re-attach vehicle battery cables,
both positive and negative.
Attach the ground last.
WARNING! TO PREVENT SERIOUS
FIRE AND INJURY:
Connect wires with
the correct polarity. There is reverse
polarity protection built-in to prevent
damage if incorrect polarity is used.
Note:
See diagram below. Use Wiring Kit
to connect to Light Bar (Figure A) and add
splitter to connect to Cube Lights (Figure B.)
Wiring Diagram
Red
Relay
Red
Fuse box
Black
Black
Black
Black
Blue
Blue
DT Male Plug
Switch
White
White
Figure A
Red
Black
DT Male Plug
DT Male Plug
Female DT Plug
Figure B
