Page 2
For technical questions, please call 1-888-866-5797.
Item 64926
IMPORTANT SAFETY INFORMATION
In this manual, on the labeling, and all other information provided with this product:
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
CAUTION, without the safety alert symbol, is used to address practices
not related to personal injury.
General Safety Warnings
WARNING Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
1.
Work area safety
a.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b.
Keep children and bystanders away
while operating a tool.
Distractions
can cause you to lose control.
2.
Personal safety
a.
Stay alert, watch what you are doing
and use common sense when operating
a tool. Do not use a tool while you are
tired or under the influence of drugs,
alcohol or medication.
A moment of
inattention while operating tools may
result in serious personal injury.
b.
Use personal protective equipment.
Always wear eye protection.
Safety
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c.
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
tool in unexpected situations.
d.
Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts.
Loose clothes, jewelry or long
hair can be caught in moving parts.
e.
Only use safety equipment that has
been approved by an appropriate
standards agency.
Unapproved safety
equipment may not provide adequate
protection. Eye protection must be
ANSI-approved and breathing protection
must be NIOSH-approved for the
specific hazards in the work area.
