Page 3
For technical questions, please call 1-888-866-5797.
Item 63391
11.
Tool service must be performed
only by qualified repair personnel.
Service or maintenance performed
by unqualified personnel could
result in a risk of injury.
12.
When servicing a tool, use only
identical replacement parts. Follow
instructions in the section of this
manual.
Use of unauthorized parts
or failure to follow maintenance
instructions may create a risk of injury.
13.
Maintain a safe working
environment.
Keep the work area
well lit. Make sure there is adequate
surrounding workspace. Keep the work
area free of obstructions, grease, oil,
trash, and other debris. Do not use
this product in a damp or wet location.
14.
Maintain labels and nameplates
on this product.
These
carry important information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
15.
Keep the handle dry, clean, and free
from brake fluid, oil, and grease.
16.
Before use read and understand
all warnings, safety precautions,
and instructions as outlined in the
vehicle manufacturer’s service
manual.
Every vehicle has specific
measurement values for vacuum
related readings. It is beyond the
scope of this manual to properly
describe the correct procedure
and test data for each vehicle.
17.
Carbon monoxide is produced
while a vehicle’s engine is
operating and is deadly in a closed
environment.
Early signs of carbon
monoxide poisoning resemble the
flu, with headaches, dizziness, or
nausea. If you have these signs,
the work area may not be vented
properly. Get fresh air immediately.
18.
People with pacemakers should
consult their physician(s)
before use.
Electromagnetic fields
in close proximity to heart pacemaker
could cause pacemaker interference or
pacemaker failure.
Caution is necessary when near coil,
spark plug cables, or distributor of
running engine. Engine should be
off during distributor adjustment.
19.
Prior to using the Vacuum Pump,
place the vehicle’s transmission
in “PARK” (if automatic)
or “NEUTRAL” (if manual).
Then, block the tires with chocks.
20.
Be alert for hot engine components
to avoid accidental burns.
21.
Use the Brake Bleeder only with
brake fluid.
Do not attempt to
use the tool to siphon any other
liquids. Damage to the internal
chamber and seal, or future brake
fluid contamination may result.
22.
Follow guidelines for proper
brake fluid disposal.
Used brake
fluid should be removed from the
vehicle and properly recycled.
Many states require recycling.
Contact your local solid/liquid waste
authority for information on recycling.
Do not reuse old brake fluid.
23.
Brake fluid may damage paint.
Clean up spilled fluid quickly.
24. The warnings, precautions, and
instructions discussed in this manual
cannot cover all possible conditions
and situations that may occur. The
operator must understand that common
sense and caution are factors which
cannot be built into this product, but
must be supplied by the operator.
