SKU 91240
Page 3
Safety Warnings and Precautions
WARNING: When using this product, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Keep work area well lighted.
3.
Keep children away. Children must never be allowed in the work area. Do
not let them handle machines or tools. Do not let unsupervised children play
with this product. Serious injury could result.
4.
Store idle equipment. When not in use, equipment must be stored in a dry
location to inhibit rust. Always lock up equipment and keep out of reach of
children.
5.
Use the right tool for the job. Do not attempt to force a small item to do the
work of a larger industrial item. Do not modify this item and do not use this
item for a purpose for which it was not intended. Do not exceed the 300 lbs.
maximum weight capacity. Note: The wooden sides provide limited support
to keep objects in the wagon; wooden sides are not designed to provide
significant weight support.
6.
Do not overreach. Keep proper footing and balance at all times. Do not
stand on this wagon. When unattended, be sure it will not accidently roll
away. Use the wagon sensibly; be careful not to overload or tip the wagon
over.
7.
Maintain tools with care. Follow instructions for lubricating and changing
accessories. The handles must be kept clean, dry, and free from oil and
grease at all times.
8.
Stay alert. Watch what you are doing, use common sense. Do not operate
any item when you are tired.
9.
Do not wear loose clothing. Do not allow loose clothing, hair or hands to
get caught in the moving parts of this wagon.
10. Check for damaged parts. Before using any item, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician.
11. Replacement parts and accessories. When servicing, use only identical
replacement parts.