Page 4
For technical questions, please call 1-888-866-5797.
Item 65594 65595
Specifications
Tank Capacity
65594
: 5 Gallons
65595:
11 Gallons
Max. Air Pressure
125 PSI
Hose Length
3'
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Inspect air tank before use, looking for damaged, loose, and missing parts.
If any problems are found, do not use air tank until repaired.
Filling the Tank
TO PREVENT SERIOUS INJURY FROM EXPLOSION:
Use only clean, dry, regulated, compressed air to fill this air tank.
Do not use oxygen, carbon dioxide, combustible gases,
or any other bottled gas to fill this air tank.
1. Take your Air Tank to any source of
clean and dry compressed air.
2. Attach air hose from the pressurized air
source to the air fitting on the Manifold (4).
3. Begin pumping air into the Air Tank.
4. Monitor the Pressure Gauge (3) as you
fill the Air Tank. Fill as needed, but do not
exceed 125 PSI.
WARNING! TO PREVENT
SERIOUS INJURY: Do not overfill tank
.
Releasing Air From Tank
1. Turn the round On/Off Wheel (5) counter-clockwise
to the open position. This allows air to flow from
the Air Tank (1) through the Air Hose (2).
2. Next place Outlet Valve at the end of the Air Hose (2)
over the valve of the object to be inflated.
3. Once the pin inside the Outlet Valve is depressed,
air will begin to flow out from the Air Tank into
the object being inflated. Once you are finished
inflating air into the object, remove the Outlet Valve
and the air will stop being released from tank.
WARNING!
Do not overinflate. Do not exceed the
maximum pressure rating of any inflatable object.
Check pressure frequently during inflation.
The Air Tank should be examined periodically. If any
damage to the welds is noted do not use the tank.
4. It the Tank will not be used for long period of time,
expel air inside Tank and hose.
Store in clean and dry location away from children.
