Harbor Freight Tools Central Machinery 46725, Руководство по сборке и эксплуатации

Страница: 4 / 7

Page 4 SKU 46725
Unpacking
When unpacking, check to make sure that all the parts are included. Refer to the Parts List
and Assembly Drawing at the end of this manual. If any parts are missing or broken, please
call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Assembly
Refer to the Assembly Drawing on page 7 during this procedure.
1. Assemble Two Legs (8) to one Lower Short Frame (7) and two Lower Long Frames (6)
by threading Screws (12), with a Washer (15).
Refer to illustrations “E” and “F” on the Assembly Drawing. Note that a Washer is
placed under every Screw. Tighten securely using a large Phillips screwdriver.
2. Place the PVC Feet (11) on the bottom of each Leg.
3. Assemble the Short Middle Frame (5) and two Long Middle Frames (4) to the Legs (8),
just assembled. Depending on the desired table height, also mount the Height
Adjuster (9) on the outside of the Legs. Use Screws (13), and Washers (15). Tighten
securely.
Refer to illustrations “A”, “B”, “C” and “G” on the Assembly Drawing.
Height Adjuster (9)
Short Middle Frame (5)
Long Middle Frame (4)
Screws (12)
Washers (15)
Leg (8)
PVC Feet (11)
REV 07/03