Page 3
SKU 38024
8.
Use eye and ear protection
. Always wear ANSI approved impact safety goggles.
Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI
approved dust mask or respirator when working around metal, wood, and chemical
dusts and mists.
9.
Do not overreach
. Keep proper footing and balance at all times. Do not reach over or
across running machines.
10.
Maintain tools with care
. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories.
11.
Stay alert
. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
12.
Check for damaged parts
. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified
technician.
13.
Replacement parts and accessories
. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.
14.
Do not operate tool if under the influence of alcohol or drugs
. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
15.
Maintenance
. For your safety, maintenance should be performed regularly by a
qualified technician.
16.
Never exceed 12 Ton limit of Jack;
Jack may be damaged or fail.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure the parts listed on page 7 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
38024.p65
10/30/03, 10:48 AM
3
Brought to you by Augusta Flint