Page 2
SKU 03185
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines in damp or wet locations.
Don’t expose to rain. Keep work area well lighted.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle or play with the Transmission Jack.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
7.
Use eye protection. Always wear ANSI approved impact safety goggles.
8.
Do not overreach. Keep proper footing and balance at all times. Do not reach over
or across running machines.
Maximum Capacity
800 Lbs.
Minimum Height
8-1/2”
Maximum Height
24-1/2”
Saddle Plate Adjustment
55 Deg. Forward, 8 Deg. Back, 30 Deg. Side to Side
Base Dimensions
30” x 17”
Adjusting Swivel Arm Dimensions
6-1/8’ L x 2” W x 3/16” Thick, with 3-3/4’ L x 1/2” W
Cutouts for bolt adjustments.
Safety Chain
48”
03185.p65
2/26/2003, 9:08 AM
2
Brought To You By Augusta Flint
