SKU 94767
For technical questions please call 1-800-444-3353
Page 3
8.
Maintain tools with care. Keep tools maintained and clean for better and
safer performance. Follow instructions for maintenance and changing
accessories. The handles must be kept clean, dry, and free from oil and
grease at all times.
9.
Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
10. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Any part that is damaged should be
properly repaired or replaced by a qualified technician. Do not use the tool if
any switch does not turn On and Off properly.
11. Guard against electric shock. Prevent body contact with grounded surfaces
such as pipes, radiators, ranges, and refrigerator enclosures.
12. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
13. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
14. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure the following parts are included.
Digital Welding Gauge
Storage Case
NOTE: Battery is not included. Any of the following sizes will fit:
303 / 357 / SR44SW / LR44 / SP303 / D303