background image

SKU 90725

    Page 6

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER
NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO
THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Maintenance

1.

Remove the batteries when the laser level will not be used for an extended

period of time.

2.

Prevent sharp impacts to the tool, such as dropping it or allowing it to bang

around in a tool box.

3.

Keep the laser level clean and dry. Wipe any dirt, moisture or grease from it

whenever necessary. Store it safely in a clean, dry place.

Parts List

1.  45 degree liquid level

4.  On/Off switch

2.  Horizontal liquid level

5.  Mini tripod (one leg hidden)

3.  Vertical liquid level

6.  Laser lens

Assembly Drawing

NOTE

: Some parts are listed and shown for illustration purposes only and are not

available individually as replacement parts.

1

2

3

6

5

4

90725 Laser Level.P65

10/13/03, 9:06 AM

6

Содержание CEN-TECH 90725







Отзывы: