Unpacking
When unpacking your Magnetic Base, check to make sure the following parts are included. If any parts are
missing or borken, please call
HARBOR FREIGHT TOOLS at 1-800-444-3353.
Part #
Description
Quantity
1.
Base
1
2.
Upright Post with Lock Nut
1
3.
Upright Post Swivel
1
4.
Snug Gauge Rod
1
5.
Indicator Clamp
1
6.
Fine Adjustment
1
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A
REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION
OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS
THERETO.
#5645
Page 4
Note: Some parts are listed and shown for illustration purposes only and are not available individually as
replacement parts.
Base (#1)
Upright Post with Lock Nut (#2)
Upright Post Swivel (#3)
Snug Gauge Rod (#4)
Indicator Clamp (#5)
Fine Adjustment (#6)
Dial in “OFF” position
7. 5/16” Adjustment Bushing 1
Note: Part# 7 (5/16” Adjustment Bushing) fits into part# 5. It will allows you to clamp 5/16” stem dial
indicators. Without the bushing it will clamp 3/8” stem dial indicators. The bushing is held in place with a
small hex stud.
REV 06d
# 7
Hex Stud
Brought to You by Augusta Flint