Harbor Freight Tools 99598 Скачать руководство пользователя страница 2

SKU 99598/99599 

For technical questions, please call 1-800-444-3353. 

Page 2

iMpOrtant saFegUards

When using electrical appliances, ba-

1. 

sic safety precautions should always 

be followed, including the following:
Read all instructions.

2. 

To protect against risk of electri-

3. 

cal shock, do not put Motor, Fan, or 

Gearbox in water or other liquid.
Close supervision is necessary when 

4. 

any appliance is used by or near 

children.
Unplug from outlet when not in use, 

5. 

before putting on or taking off parts, 

and before cleaning.
Avoid contacting moving parts. Feed 

6. 

food by hand. Always use food push-

er.
Do not operate any appliance with 

7. 

a damaged cord or plug or after the 

appliance malfunctions, or is dropped 

or damaged in any manner. Return 

appliance to the nearest authorized 

service facility for examination, repair 

or electrical or mechanical adjust-

ment.
The use of attachments not recom-

8. 

mended or sold by the manufacturer 

may cause fire, electric shock or 

injury.
Do not use outdoors. For Household 

9. 

Use Only.
Do not let cord hang over edge of 

10. 

table or counter.
Do not let cord contact hot surface, 

11. 

including stove.

Do not use fingers to scrape food 

12. 

away from discharge disc while appli-

ance is operating. Cut type injury may 

result.

  saVe tHese 

instrUctiOns.

saVe tHis ManUal

Keep this manual for the safety warn-

ings and precautions, assembly, operat-

ing, inspection, maintenance and cleaning 

procedures.  Write the product’s serial 

number in the back of the manual near the 

assembly diagram (or month and year of 

purchase if product has no number).  Keep 

this manual and the receipt in a safe and 

dry place for future reference.

iMpOrtant saFetY 

instrUctiOns

in this manual, on the labeling, 

and all other information provid-

ed with this product:

  this is the safety alert 

symbol.  it is used to alert 

you to potential personal 

injury hazards.  Obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

danger indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.

Содержание 99598














Отзывы: