Page 5
SKU 97028
For technical questions, please call 1-800-444-3353.
sPECiFiC saFETY rulEs
WarNiNg! To prevent serious injury and/or property damage:
Wear ANSI-approved safety goggles and heavy-duty work gloves during use.
1.
Do not exceed max air pressure of 100 PSI.
2.
Disconnect from air supply when not in use.
3.
Mount on flat, level surface able to support the weight of the Planishing Hammer
4.
and the material being hammered.
Inspect before each use; do not use if parts are loose or damaged.
5.
Read this manual before set up and/or use.
6.
Maintain labels and nameplates on the tool. These carry important safety
7.
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare to begin work before turning on the tool.
8.
Keep fingers away from the anvil head.
9.
Do not leave the tool unattended when it is plugged into an air supply. Turn off
10.
the tool, and disconnect from air supply before leaving.
Use clamps (not included) or other practical ways to secure and support the
11.
workpiece to a stable platform. Holding the work by hand or against your body is
unstable and may lead to loss of control.
This product is not a toy. Keep it out of reach of children.
12.
Some dust created by power sanding, sawing, grinding, drilling, and other
13.
construction activities, contains chemicals known [to the State of California] to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement or other masonry products
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles. (California Health &
Safety Code § 25249.5,
et seq.
)
The warnings, precautions, and instructions discussed in this instruction manual
14.
cannot cover all possible conditions and situations that may occur. It must be
