SKU 95176
For technical questions, please call 1-800-444-3353
Page 3
9.
Do not overreach. Keep proper footing and balance at all times.
10. Maintain tools with care. Keep tools clean for better and safer performance.
The Pistol handle must be kept clean and dry at all times.
11. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
12. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be replaced.
13. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels if taking prescription medicine to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
the tool.
14. Maintenance. Thoroughly wash all components in warm, soapy water after
each use.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure the following parts are included. See photo
below and refer to the Parts List. If any parts are missing or broken, please call
Harbor Freight Tools at the number on the cover of this manual.
(1)
(2)
(3)
(4)
(5)
