SKU 94861 For technical questions, please call 1-800-444-3353 PAGE 4
15.
Store idle tools and equipment. When not in use, the Rolling Tool Rack must
be stored in a dry location to inhibit rust. Always lock up the tool and keep out of
reach of children and other unauthorized people.
16.
Do not use this product if under the influence of alcohol or drugs. Read
warning labels if taking prescription medicine to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not use the
Rolling Tool Rack.
17.
Once the Rolling Tool Rack is moved to a desired work location, make sure
to lock the Caster Wheels in position using the Casters’ Locks.
18.
WARNING! The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be under
stood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 8 are
included. If any parts are missing or broken, please call Harbor Freight Tools at the number
shown on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
NOTE:
For further references to the parts discussed in this manual,
see the Assembly Diagram and Parts List shown on page 8.
To Attach The Support Booms And Casters To The Base Assembly:
1.
Align the
two mounting holes at the base of each Support Boom (6) with the two
outer mounting holes in each corner of the Base Assembly (1).
(See Figure A, next page.)
