background image

SKU 94830  

       For technical questions, please call 1-800-444-3353 

PAGE 7

OPERATING INSTRUCTIONS

1. 

       WARNING!  Do not exceed the maximum lifting capacity of the Exten-
sion Wings (1,200 pounds).  
Exceeding the maximum lifting capacities could    
cause personal injury and/or property damage.

2. 

       WARNING!  Follow all instructions and safety precautions as outlined in the    
model 94813 Motorcycle Lift manual.

3. 

Make sure the Platform of the Motorcycle Lift is fully collapsed to the floor.  Also,    
make sure the Removable Plate of the Motorcycle Lift is properly positioned over   
the inspection hole of its Platform.

4. 

With assistance, roll the object to be raised up the Right and Left Ramp Exten-
sions (3, 4) and onto the Right and Left Side Extensions (1, 2).

5. 

You should stabilize the object using tie-down straps (not included) on each side   
of the motorcycle with one end of the straps tied to the object and the other end    
of the straps tied to the Right and Left Side Extensions (1, 2).

6. 

Connect an air hose to the Motorcycle Lift’s Foot Air Valve.  Then set the air  

 

compressor’s regulator between 100 and 120 PSI.  Do not exceed 120 PSI.

7. 

Step on and hold down the 

right side of the Motorcycle Lift’s Foot Air Valve to 

raise the Lift.

8. 

When the Motorcycle Lift has been raised to the working height, lower its Safety 
Bar completely to prevent the Lift from accidentally lowering.

9. 

When work on the motorcycle is completed, check under the Motorcycle Lift to    
make sure there are no tools, parts, etc. and that it is safe to lower  
the Lift.

10. 

Remove the Safety Bar.  Then step on and hold down the 

left side of the Motor-   

cycle Lift’s Foot Air Valve to 

slowly

 lower the Lift to the floor.

11. 

With assistance, remove the tie-down straps from the object.  Then, slowly back    
the object completely off the Motorcycle Lift.

12. 

Turn off the air compressor.  Step on and hold down the 

left side of the Motor 

 

cycle Lift’s Foot Air Valve to release any remaining compressed air in the system.  
Then, disconnect the compressor’s air hose from the Foot Air Valve.

13. 

Make sure to store the Motorcycle Lift and its Extension Wings in a clean, dry,  

 

safe location out of reach of children and other unauthorized people.

Содержание 94830










Отзывы: