SKU 94774
For technical questions please call 1-800-444-3353.
Page 4
ASSemblY
Your Radio Controlled Airplane will require complete assembly. It is important that you
read the entire manual to become familiar with the product BEFORE you assemble and use
the Airplane. Before assembling the Airplane be sure that you have all parts described in
the Parts List and Assembly Diagram located on page 8 of this manual.
Landing
Gear (5)
Figure 1
shaft
Motor (12)
Propeller (9)
Figure 2
1. Insert the Landing Gear (5) up into the slot beneath the fuselage by pinching it and
sliding it into place - see Figure 1.
Using Hex Wrench (19), remove the Hex Nut from the end of the shaft on the Motor
2.
(12). Slide the Propeller (9) onto the shaft. Thread the Hex Nut back onto the end
of the shaft to secure the Propeller (9) in place-see Figure 2. Please note and make
certain of correct directional setting for the Propeller once it is installed.
Reinforced Tube (2)
Main Wing Assembly (1)
Figure 3
3. Insert the Reinforced Tube (2) into one Main Wing (1). Insert the free end of the Rein-
forced Tube (2) through the hole in the fuselage and into the second Main Wing, thus
connecting both Main Wings together as seen in Figure 3 and the Assembly Diagram.
