Page 5
For technical questions, please call 1-800-444-3353.
Item 93575
General Operation
FIGURE 2
Knob (4)
Override Key (8)
Keypad (7)
1. To open the Safe, input your PIN, press
the letter “B”, and turn the Knob (4)
clockwise. The unit will beep twice
and the green light will illuminate
indicating that the Safe is now open.
Note:
After entering your PIN you have
5 seconds to turn the Knob (4) and
open the Safe. After 5 seconds, the
mechanism re-locks. If the mechanism
re-locks, repeat number one above.
If incorrect numbers are entered and
the letter “B” is entered three times,
the Safe will lock up for 20 seconds.
Note:
If you forget or lose your PIN. You can
gain access to the Safe by using your
Override Key (8). The Key (8) fits in the
keyhole shown in
FIGURE 2
below. You
will have to remove a small panel covering
the keyhole. Insert your Key (8), and turn
it counterclockwise to open the Safe.
IMPORTANT
1. The Key Number and the Safe Number
are on the head of the emergency
lock. They will be needed if the key
needs to be replaced. Store the Key (8)
somewhere secure, outside of the Safe.
2. The red and green lights will illuminate
on the control panel when the batteries
are low. See the maintenance section
to replace the batteries. If batteries
become so low that the Safe will not
open, use the Override Key (8).
