SKU 92580
For technical questions, call 1-800-444-3353
Page 7
Troubleshooting
1.
If the screen will not glow while in the ON position:
Check the batteries. Make sure they are charged and installed properly.
2.
If the image fades or disappears completely:
a. If you are in complete darkness, the Binoculars need some light.
Activate the Illuminator (11).
b. It is also possible that you pointed the device at an intense light
source which might have shut down the unit to protect the intensifier
tube. Turn the power off and wait five minutes before turning it
back on.
3.
If unable to properly focus:
Try adjusting the focus on both the Eyepiece and the objective lens on
the front of the Binoculars (1). Also, try cleaning the lens with
professional supplies.
Figure C
Figure D
Note: You can attach the Night Vision Binoculars (1) to a tripod (not included),
using the Screw (9) and Washer (8) (not shown).
Note: A tripod cannot be attached when the Amplifier is positioned below
the Binosulars.
Adapter
Rail (2)
Maintenance
1.
Always clean the lenses with professional supplies. Never wipe dirt or
dust off the lenses with a dry cloth. You may use dry, compressed air.
2.
Clean the housing with a dry, soft cloth.
3.
Store in a dry, well ventilated area. Never store near a heater, air
conditioner, or in direct sunlight.
4.
Remove both batteries when storing for more than two weeks.
Tape (b)
