SKU 92049
Page 4
Operation
1.
Before you begin using unscrew the Cup and Dispenser Valve Cap and wash
the interior of the container with mild soap and warm water. Wash the Cup.
Rinse well. Refer to the photos on the previous page.
Caution: Do not place unit in a bath of water. This may damage the electrical
components of the unit.
2.
Fill the Beverage Holder with the desired drink or liquid food.
3.
Screw in (clockwise) the Dispenser Valve Cap.
4.
Plug one end of the Power Cord into the bottom of the Beverage Container
and the Fused Plug into a 12 VDC vehicle power socket.
This will heat up the contents and keep it warm. When the Power Cord is
unplugged, the contents will keep warm for a period of time.
Note: If the stored drink is to be kept cool, do not plug in the Power Cord.
5.
To pour a drink from the Beverage Holder, press in on the Dispenser Valve
Cap until it locks in the down position, then pour.
If the contents are of a thick consistency
(such as soup), unscrew the Dispenser
Valve Cap and pour out the contents.
6.
Replace the Dispenser Valve Cap and
press in on the cap button to lock.
7.
Wash container after each use.
8.
Store unit with Power Cord in the factory
box when not in use.
Maintenance / Cleaning
1.
This product has no replaceable parts.
2.
After each use, place warm water and mild soap inside the Beverage Holder
to clean. Do not submerge unit into water.
3.
If the unit does not warm up, the 10A fuse in the Fused Plug may need
replacement. Unscrew the plug cap to view and replace fuse. If the fuse is
good, the unit is not receiving power, or it is defective and needs servicing by
a qualified technician.
